FREE SHIPPING ON ALL ORDERS*  
Find:   
Shopping Cart
$0.00
» About Us » Contact us » Group Programs  
SAFETY FOR: PERSONAL  |  HOME  |  AUTO  |  CHILD  |  SENIOR  |  WORKPLACE  |  TRAFFIC  |  MUNICIPAL

 
Home

 
Personal Safety
 
Pet Safety
 
Home Safety
 
Auto Safety
 
Child Safety
 
Senior Safety
 
Workplace Safety
 
Traffic Safety
 
Municipal Safety
 

 
Thank You
 
Safety Tips
 
Contact Us
 
Shipping and Returns
 
About Us
 
How We Choose Our Products

We accept these credit cards.
Featured Specials:
Crimewatch Adapter $21.95

Lifeline AAA Traveler Kit $39.95

Child Home Safety Kit $17.95

Hazard Alert Radios (WR-300)
$ based on model

 
Home  /   Flame Stop IM

Flame Stop IM


Price: $364.95
Qty:

The rst intumescent latex paint that saves 50% in labor due to a single coat. Tested with a higher coverage rate which saves labor and cost. Stain and mold blocking are added benets due to new technology. Flame Stop IM is now 30 minute rated with a 2 coat application and passes the NFPA 703 which is the same standard that must be met with fire retardant pressure impregnated wood.

PRODUCT SOLD IN 5-GALLON BUCKETS.

 

Easy spray, brush, or roll application. Intumescent paints have been manufactured for over 50 years however until now no paint has incorporated all of the added benets especially the most important; a single coat application and a high coverage rate without jeapordizing the life saving low smoke and Class A ame spread. Flame Stop IM is now 30 minute rated with a 2 coat application and passes the NFPA 703 which is the same standard that must be met with re retardant pressure impregnated wood. Flame Stop Intumescent Paint is user-friendly, waterbased, non-toxic, labor saving, mold inhibitor, fast curing, high coverage rate, stain blocker, may be used as a primer or nish coat.

ADVANTAGES:

Class A one coat system. FLAME SPREAD 10. Class A, FLAME SPREAD 0 for 30 minute NFPA 703 with two coats.

BASIC USES:

Some of the applications of Flame Stop intumescent latex paint include commercial and residential interior surfaces such as paneling, non-porous substrates, veneer, gypsum board, wood, plastic, previously coated surfaces and MDF.

APPLICABLE STANDARDS:

Flame Stop IM intumescent latex paint was tested to the following standards:
ASTM E-84, NFPA 255, UL 723: Omega Point Laboratories #8746-108578
ASTM E-84, NFPA 255, NFPA 703 30 MIN: SWRI (Southwest Research Institute) #01.10932.01.195 

APPLICATION:

Flame Stop IM intumescent latex paint should be applied as is by spray, brush or roll. Use airless sprayer suitable for applying a latex-based paint. Tips sizes vary however we suggest a .017. Apply at the rate of 150 square feet per gallon for ASTM E-84. For NFPA 703 (30 Minute test) apply two coats at 200 sq. ft./ gal.

PLEASE NOTE FLAME STOP PRODUCTS ARE NON-RETURNABLE
Copyright 2009 Safety Think, Inc. All Rights Reserved - Privacy Policy / Terms of Service 1.866.SAFETY4 (1.866.723.3894)
ClientReady Ecommerce Sites