Lifeline AAA Traveler Kit $39.95
Child Home Safety Kit $17.95
Hazard Alert Radios (WR-300) $ based on model
The rst intumescent latex paint that saves 50% in labor due to a single coat. Tested with a higher coverage rate which saves labor and cost. Stain and mold blocking are added benets due to new technology. Flame Stop IM is now 30 minute rated with a 2 coat application and passes the NFPA 703 which is the same standard that must be met with fire retardant pressure impregnated wood.
****CALL FOR PRICING*****
Easy spray, brush, or roll application. Intumescent paints have been manufactured for over 50 years however until now no paint has incorporated all of the added benets especially the most important; a single coat application and a high coverage rate without jeapordizing the life saving low smoke and Class A ame spread. Flame Stop IM is now 30 minute rated with a 2 coat application and passes the NFPA 703 which is the same standard that must be met with re retardant pressure impregnated wood. Flame Stop Intumescent Paint is user-friendly, waterbased, non-toxic, labor saving, mold inhibitor, fast curing, high coverage rate, stain blocker, may be used as a primer or nish coat.
ADVANTAGES:
Class A one coat system. FLAME SPREAD 10. Class A, FLAME SPREAD 0 for 30 minute NFPA 703 with two coats.
BASIC USES:
Some of the applications of Flame Stop intumescent latex paint include commercial and residential interior surfaces such as paneling, non-porous substrates, veneer, gypsum board, wood, plastic, previously coated surfaces and MDF.
APPLICABLE STANDARDS:
Flame Stop IM intumescent latex paint was tested to the following standards: ASTM E-84, NFPA 255, UL 723: Omega Point Laboratories #8746-108578 ASTM E-84, NFPA 255, NFPA 703 30 MIN: SWRI (Southwest Research Institute) #01.10932.01.195
APPLICATION:
